Sump Baffle Kit Waterbox Red Sea
$82.99 – $132.99
“Once you raise the bar, you can never lower it.” – Me
Made from 100% high quality, 1/4″ cast acrylic, these baffle kits will give your sump separate skimmer and refugium areas. The kits utilize my renown Octo Pods™, with the strongest neodymium magnets available, along with the very strict quality control standards I use to make the pods. These are absolutely the most secure, toughest sump baffle kits available. Fully designed and made by myself, these kits are also adjustable in case there are any dimension variations from the manufacturer. The baffle kits will cut the open area approx. in half. I have kits designed for popular Waterbox and Red Sea sumps, but I can also custom make them to fit just about any sump you have. If you need different dimensions please inquire.
- Optional clear viewing window is available. Please be aware this window could allow light to spill into the back chamber.
- Please make sure your sump matches one of the attached diagrams. If you have another type of sump, contact me to have one custom made.
- Waterbox sizes are measuring the inside-to-inside width of the center chamber.
- External magnets (for both pieces) need about .625″ for clearance.
*Note: These dividers are not guaranteed to raise the water level in your sump. They are simply to divide a single chamber into two chambers. Because flow rate in your sump may be different than someone else’s, your water level may not reach the top overflow teeth cut in your baffle. THIS IS NORMAL! The teeth are mainly used for backup, emergency purposes.
*** THE SCREWS SHOULD BE LIGHTLY SNUG AND NOT TIGHT. ***I use N52 neodymium magnets. Rare earth magnets are not reef safe on their own, so I fabricate custom acrylic pods that encapsulate the magnets and keep them away from your water. Please visit the magnet warning page for more information on these magnets.
My products are made to order, custom! Please allow up to 10 business days for fabrication time for most products. Because my products are made to order, fulfillment time can rarely take longer. Full custom orders can take up to four weeks to complete. Please let me know ahead of time if this may be an issue. Shipping prices listed are to the contiguous U.S. Please contact me if you live elsewhere and want a shipping quote. Because my products are handmade and/or hand assembled, there may be small irregularities (fingerprints, marring, hair, etc) which will not effect the performance of your product.
Plastics are fragile which can break and scratch easily. Always handle with care. Surface can be cleaned with a very diluted soapy water mixture and a soft microfiber cloth.
This product is warranted to be free of defects for the lifetime of the product. We will, at my discretion, repair or replace your product at no charge during this period (See the Warranty page for more info.)
Waterbox, Red Sea
NA, 170 G1, 170 G2, 200xl, 250 G1, 350 G1, 425 G1, 450, 525 G1
|Waterbox Width (See diagram)||
NA, 7", 9-10.5”, 11-12.5", 12.5-14", 15"-16", 17.2"
Only logged in customers who have purchased this product may leave a review.